PROCEDURE 1

NOTE

Before testing LED light, please follow procedure 1 to disassemble LED first.

Step 1

Lever off screw cover.

Step 2

Unscrew.

Step 3

Remove thermostat box.

Step 4

Disconnect terminal for LED.

Step 5

Lever off LED plate.

CHECK AND TEST 1

Step 1

Connect new LED onto terminal and plug in to switch on the appliance.

Tip 1:

When inserting capillary into the hole, make sure the first red mark goes in the hole, but second one remains outside of the hole.

Tip 2:

Make sure the pins of thermostat cover are inserted into the holes.

Tip 3:

Make sure wires are placed into cavity of thermostat.