Step 1

Observe the alignment between door stopper and hinge to determine root causes.

Case 1:

Screw is not driven into proper final position, causing misalignment between door stopper and hinge. Drive it in with a screw driver.

Case 2:

Door stopper is deformed and causing misalignment.

Case 3:

Too many washers are causing misalignment between door stopper and hinge.

PROCEDURES 1

Step 1

Remove screw cover.

Step 2

Unscrew.

Step 3

Remove the top cover.

Step 4

Unscrew 3 bolts.

Step 5

Remove the door

Step 6

Unscrew and remove deformed door-stopper, and attach a new one onto top door.

Tip 1

If there is a washer on hinge, please don’t forget to add washer onto hinge pin.

Tip 2

When installing door onto hinge, please check the alignment of doorstopper and hinge.

Tip 3

Make sure gasket is properly attached.

Tip 4

Make sure gaps between doors are even.