CHECK AND TEST 1

Step 1

Check if there is any ice
on the top of freezer air
duct ( Bottom part).

Step 2

Check if there is any ice
blocking the air-back-toevaporator
duct.

DIAGNOSIS 1


PROCEDURE 1


Step 1

Remove all shelves.

Step 2

Remove basket.

Step 3

Remove screw covers.


Step 4

Unscrew.

Step 5

Pull the buttom air duct
out.


Step 6

Disconnect the wires for
thermostat.

Step 7

Take bottom air duct
away.

CHECK AND TEST 2



NOTE:
Please pay special
attention to the area.
when the sponge is
compressed, it means
the sealing is good.

Step 2

If it is found the sealing
is not good, add another
sponge to strength the
sealing.

Step 3

Check whether the foam is
sealing the gaps properly.

If not, please replace
with new foam.

CHECK AND TEST 3

Step 1

Rework 1 week later,
check if there is any ice
on the top of freezer air
duct ( Bottom part).


DIAGNOSIS 3


GO BACK TO COMPONENT LIST