CHECK AND TEST 1
Step 1
Uncrew mainboard cover
and power on the appliance.
Step 2
Test voltage of terminals for
compressor as shown in the
picture.
WARNING!
HIGH VOLTAGE!
Step 3
Take note of result.
Then, remove plug off
to quit manual defrost.
DIAGNOSIS 1
PROCEDURE 1
Step 1
Unscrew cover of
mainboard with a
Cross-head screwdriver.
Step 2
Disconnect terminals.
Step 3
Unscrew the mainboard.Step 4
Prize off the buckle to
remove mainboard.
Reverse steps above
to install a new
mainboard.
CHECK AND TEST 2
Step 2
Test voltage of terminals for
compressor as shown in the
picture.
WARNING!
HIGH VOLTAGE!
Step 3
Take note of result.
Then, remove plug off
to quit manual defrost.
DIAGNOSIS 2
GO BACK TO COMPONENT LIST