9.5 APPEARANCE FAULTS:
COMPRESSOR PLATE IS DAMAGED
CHECK AND TEST 1
Step 1
See if compressor plate is deformed.
DIAGNOSIS 1
GENERAL PROCEDURES TO DISASSEMBLE AND INSTALLATION COMPRESSOR HOLDER PLATE.
Step 1
Unscrew earthing wire.
Step 2
Unscrew the nut of compressor.
Step 3
Lay down product so that compressor is resting on foam.
Step 4
Unscrew and remove compressor plate.
REVERSE ABOVE STEPS TO INSTALL THE COMPRESSOR HOLDER PLATE
GO BACK TO FAULT LIST APPEARANCE