CHECK AND TEST 1
PROCEDURE 1
Step 1
Prize up screw cover.
Step 2
Unscrew.
Step 3
Push the top cover
forward.
Step 4
Take off the top cover.
Step 5
Unscrew 3 bolts and
remove door hinge.
Step 6
Remove the door.
Step 7
Lay down the cabinet and unscrew the adjustable foot.
Step 8
Unscrew the bolts and
remove bottom hinge.
PROCEDURE 2
Tip 1
If there is pin, don’t forget to add a washer onto hinge pin.
Tip 2
If there is a doorstopper, when installing door onto hinge, please check the alignment of doorstopper and hinge.
Tip 3
Make sure gasket is properly attached.
Tip 4
Make sure the door is parallel to the cabinet (top cover).
GO BACK TO FAULT LIST RELIABILITY