PROCEDURE 1


Step 1

Unscrew bottom
attachment.

Step 2

Unscrew top
attachment.

Step 3

Remove the plastic
cover.

Step 4

Unscrew central
attachment on left and
right side.

Step 5

Unscrew the plastic
guider.

Step 6

Hold cabinet and move
it out 3mm.

Note:
Reverse procedures
above to install the
appliance.

CHECK AND TEST 1


Step 1

Place a torch in cabinet
and check to see if light
leaks out from gasket.

Step 2

Blow hot air onto gasket
with hair dryer to soften,
so that gasket can be
easily attached onto
cabinet.

DIAGNOSIS 2


CHECK AND TEST 2

Step 1

Measure deformation of
door.
Measure the deformation
of cabinet.

DIAGNOSIS 3


PROCEDURE 2


Step 1

Unscrew the fixation
plate and remove it.

Step 2

unscrew top hinge and
remove it.

Step 3

Remove fridge door.

Step 4

Unscrew middle hinge.





Step 4

Remove fridge door.


Reverse above
procedure to replace
door.
Then reverse procedure
1 to install product.

CHECK AND TEST 3

Step 1

1 week later, check if
there is water in fridge.

DIAGNOSIS 4


GO BACK TO COMPONENT LIST