CHECK AND TEST 1

Step 1

Open the fridge doors to check carefully if gasket is cracked.

DIAGNOSIS 1

PROCEDURE 1


Step 1
Pull gasket out from 4
corners.

Step 2
Install a new gasket.

Tip 1
Start from corner.

Tip 2

Make sure gasket foot is pressed into gasket seat completely.

Tip 3

Make sure gasket is well-aligned with gasket seat.

Tip 4

After closing door,
make sure gasket is
well-attached to door.

CHECK AND TEST 2

Step 1
Check to see if gasket is
deformed.
1) Example of slight
deformation.

2) Example of serious
deformation.

Step 2

If gasket is deformed
slightly, blow hot air onto
gasket with Hair Dryer
to soften, so that gasket
can be easily attached
onto cabinet.

Step 3

If gasket is seriously
deformed, please
measure the width of
gasket seat opening with
Vernier calipers.

Step 4

Assessment of results
after completing step 3
and rework method.

Step 5

Use tool with same
shape as gasket seat
and insert into the
seat. Then turn the tool
around.

DIAGNOSIS 3

PROCEDURE 2


Step 1
Pull gasket out from 4
corners.



Step 2
Install a new gasket.

Tip 1

Start from corner.


Tip 2
Make sure gasket foot is
pressed into gasket seat
completely.

Tip 3

Make sure gasket is
well-aligned with gasket
seat.

Tip 4

After closing door,
make sure gasket is
well-attached to door.

CHECK AND TEST 3

Step 1

Test for new door:
Insert the gasket into
gasket seat and pull it
with a force of 30N.

DIAGNOSIS 3

PROCEDURE 3

Step 1

Unscrew bottom
attachment.

Step 2

Unscrew top
attachment.

Step 3

Remove the plastic
cover.

Step 4
Unscrew central
attachment on left and
right side.

Step 5

Unscrew the plastic
guider.

Step 6

Hold cabinet and pull
appliance out.

PROCEDURE 4


Step 1

Unscrew the fixation
plate and remove it.

Step 2

Unscrew top hinge and
remove it.

Step 3

Remove upper door.

Step 4

Unscrew middle hinge.

Step 5

Remove fridge door.

Step 6

Reverse procedures
above to replace fridge
door.
Pay attention to cabinet
positioning.

CHECK AND TEST 4

Step 1

Insert the gasket into
gasket seat and pull it
with a force of 30N.

DIAGNOSIS 5

CHECK AND TEST 5

Step 1

1 week later, check if
there is water in fridge.

DIAGNOSIS 6

GO BACK TO COMPONENT LIST