PROCEDURE 1


Step 1

Unscrew bottom
attachment.

Step 2

Unscrew top
attachment.

Step 3

Remove the plastic
cover.

Step 4
Unscrew central
attachment on left and
right side.

Step 5

Unscrew the plastic
guider.

Step 6

Hold cabinet and move
it out 3mm.

CHECK AND TEST 1

Step 1

Place a torch in cabinet, then close the door and check to see if light leaks out from gasket.

Step 2

Blow hot air onto gasket with hair dryer to soften, so that gasket can be easily attached onto cabinet.

DIAGNOSIS 1



CHECK AND TEST 2


Step 1

Measure deformation of
door.
Measure the deformation
of cabinet.

DIAGNOSIS 3


PROCEDURE 2

Step 1

Unscrew the fixation
plate and remove it.


Step 2
unscrew top hinge and
remove it.

Step 3

Remove fridge door.

Step 4

Reverse above
procedure to replace
door.
Then reverse procedure
1 to install product.

CHECK AND TEST 3

Step 1

1 week later, check if
there is water in fridge.

DIAGNOSIS 4

GO BACK TO COMPONENT LIST