PROCEDURE 1
Step 1
Unscrew bottom
attachment.
Step 2
Unscrew top
attachment.
Step 3
Remove the plastic
cover.
Step 4
Unscrew central
attachment on left and
right side.
Step 5
Unscrew the plasticguider.
Step 6
Hold cabinet and pullappliance out.
CHECK AND TEST 1
Step 1
Unscrew the locking
plastic.
Step 2
Remove the blue plastic.
Step 3
Lever off the terminalbox.
Step 4
Pull out integratedprotector and starter.
Step 5
Disconnect terminals.
Step 6
Put the pin into thehole connected with
compressor to test.
DIAGNOSIS 1
GO BACK TO COMPONENT LIST