PROCEDURE 1


Step 1

Unscrew bottom
attachment.

Step 2

Unscrew top
attachment.

Step 3

Remove the plastic
cover.

Step 4
Unscrew central
attachment on left and
right side.

Step 5

Unscrew the plastic
guider.

Step 6

Hold cabinet and move
it out 3mm.

Note:
Reverse procedures
above to install the
appliance.

CHECK AND TEST 1

Step 1

Check to see whether
pipes are colliding.
Separate the pipes that
are touching each other.

Note

Make sure pipes aren’t
touching water tray or
walls.

Step 2
Check if pipes are
touching wall of
compressor area.

Note

Make sure pipes aren’t
touching water tray or
walls.

Step 3
Check to see whether
there is pipe resonance.

PROCEDURE 3