PROCEDURE 1

Note

Drain pipe is covered by fridge air duct, you need to disassemble and remove fridge air duct to check. 

Step 1

Remove shelves. 

Step 2

Remove chill box. 

Step 3

Remove chill flap. 

Step 4

Lever 2 decorative strips off and remove. 

Step 5

Remove the 4 screws. 

Step 6

Pull out fridge air duct. 

Step 7

Disconnect the terminals. 

Step 8

Remove water tray. 


CHECK AND TEST 1

Step 1

Insert a hard plastic belt into drain pipe. 

Step 2

Check to see if the belt passes through the drain pipe. 

DIAGNOSIS 1


CHECK AND TEST 2

Step 1

Mark the belt at the entrance of drain pipe. 


Step 2

Measure the length of part inserted into drain pipe. 

DIAGNOSIS 2


PROCEDURE 2


Tip 1

When reinstalling fridge air duct, first put the positive end of buckle on the top into the negative ends. 

Tip 2

Then put the positive end of buckle on the sides into the negative ends. 

Tip 3

Lastly, fasten the buckles on the sides by knocking them in. 

GO BACK TO COMPONENT LIST