Check carefully to see if gasket is deformed.
Pull gasket out from corner.
TIPS FOR INSTALLING GASKET.
Start from corner.
Tip 2
Make sure base of gasket is pressed into trough completely.
Make sure gasket is properly aligned with edges of trough.
After closing the door, make sure gasket is well attached onto door.
Tip 5
Make sure gaps between doors are even.
Step 1
Check to make sure that gasket is not wrinkling.
Step 1
Measure entrance width of gasket seat with vernier calipers.
Remove the cover.
Unscrew 3 bolts and remove the top hinge.
Remove fridge door.
Loosen the middle hinge and remove it.
Remove freezer door and replace with new one. Reverse above steps to install the new door.
Before installing new door, please check below tips.
Check if gasket falls off.
Insert the gasket into trough and pull it with a force of 30N.
Don’t forget to put washer on hinge pin.
Make sure gaps between doors are even.