CHECK AND TEST 1
Step 1
Open freezer door to check if temperature controller is set to coldest position.
DIAGNOSIS 1
PROCEDURE 1
Step 1
Remove freezer shelf.
Step 2
Lever 2 screw covers off.
Step 3
Unscrew 2 screws.
Step 4
Remove air duct:
a. Hold the decorative cover of air duct;
b. Pull air duct out;
c. Disconnect the terminal
of fan motor;
c. Disconnect the terminal of fan motor;
d. Remove freezer air duct.
Step 5
Loosen the screw.
Step 6
Remove fan cover.
Step 7
Lever clasps off.
Step 8
Take away the foam.
Step 9
Pull controller out of air duct plastic cover.
Step 10
Use knife to cut off 4mm of wind shield at the 2 ends and top part showed on right picture.
Step 11
picture in right side is the effect after cutting off.
DIAGNOSIS 2
PROCEDURE 2
Tip 1
Make sure outlet for fridge
is well-sealed.
Tip 2
Ensure proper alignment
between foam and plastic.
Tip 3
Check the sealing of air
duct.
Tip 4
If sponge is not compressed, we can assert there is a sealing problem.
Tip 5
Add a sponge to uncompressed area
