CHECK AND TEST 1
Step 1
Open fridge doors and check carefully to see whether gasket is cracked.
Step 2
Check carefully if gasket is deformed.
DIAGNOSIS 1
PROCEDURE 1
Step 1
Pull gasket out by the corner.
TIPS FOR INSTALLING
GASKET:
TIPS FOR INSTALLING GASKET:
Tip 1
Start from the corner.
Tip 2
Make sure base of gasket is pressed into trough completely.Tip 3
Make sure gasket is properly aligned with edges of trough.
Tip 4
After closing the door, make sure gasket is well attached onto door.
Tip 5
After closing the door,
make sure gasket is well
attached onto door.
CHECK AND TEST 2
Step 1
Check carefully if gasket is wrinkling or not.
Step 2
Measure the width of trough opening with Vernier calipers.
Step 3
Use tool of same shape as gasket seat and insert into gasket seat, then flip the tool around.
DIAGNOSIS 2
PROCEDURE 2
Step 1
Unscrew hinge cover.
Step 2
Remove the cover.
Step 3
Disconnect the terminals.
Step 4
Unscrew 3 bolts and remove the top hinge.
Step 5
Remove fridge door.
Reverse above steps to install fridge door.
CHECK AND TEST 3
Step 1
Check if gasket falls off.
Step 2
Insert the gasket into trough and pull it with a force of 30N.
When install fridge door,
pay attention to below
tips.
When install fridge door, pay attention to below tips.
Tip 1
Don’t forget to put
washer on hinge pin.
Tip 2
Make sure gasket is properly attached.Tip 3
Make sure gaps between doors are even.
DIAGNOSIS 3
