CHECK AND TEST 1


Step 1

Check if the power cord in the compressor room is damaged. 

DIAGNOSIS 1


PROCEDURE 1


Step 1

Cut off the wire. 

Step 2

Peel off the sleeves.

Step 3

Make sure wires are in proper order and connect them. 

Step 4

Tin soldering.

Step 5

Cover connecting point with electrical tape. 

CHECK AND TEST 2

Step 1

Perform current leakage test: Put one detector on earthing wire of socket, and another detector on processing pipe. 

DIAGNOSIS 2


GO BACK TO COMPONENT LIST