8.11 RELIABILITY FAULTS:
WATER DRIPS FROM WATER DISPENSER
CHECK AND TEST 1
Step 1
Dispenser drips or doesn’t expel water.
Step 2
Check if water tank is pushed into final position.
DIAGNOSIS 1
CHECK AND TEST 2
Step 1
Remove tank.
Step 2
Check to see if valve is screwed into final position.
Step 3
Check to see if the slot on door for water tank is deformed.
DIAGNOSIS 1
CHECK AND TEST 3
Step 1
Check to see whether the slot on water tank is deformed or not.
DIAGNOSIS 3
CHECK AND TEST 4
Step 1
Check if the rubber washer is broken or not.
Step 2
Loosen the latch.
Step 3
Remove the cover.
Step 4
Lever off the another washer.
Step 5
Remove the washer and verify whether it is broken.
DIAGNOSIS 5
CHECK AND TEST 5
Step 3
Check the attachment of rubber core.
DIAGNOSIS 5
CHECK AND TEST 6
Step 1
Pull the bottom part of valve.
Step 2
Disassemble it.
Step 3
Check if the rubber is cracked or deformed.
DIAGNOSIS 6
CHECK AND TEST 7
Step 1
Measure the free length of spring.
DIAGNOSIS 7
CHECK AND TEST 8
Step 1
Pull out the tap.
Step 2
Check if white plastic is broken or deformed.
If so, pull it out to replace it.
GO BACK TO FAULT LIST RELIABILITY