CHECK AND TEST 1

Step 1
Open the door to let
internal temperature warm
up to ambient temperature,
then set gear to the coldest
setting and let appliance
run for 40 min.

Step 2

Turn knob slowly to lowest
gear until the compressor
stops.

DIAGNOSIS 1

PROCEDURE 1

Step 1

Lever off screw cover.

Step 2

Remove screw cover

Step 3

Remove thermostat
cover.

Step 4

Disconnect the terminals

Step 5

Lever off the knob.



Step 6

Disconnect terminal for
thermostat.

Step 2

testo testo

DIAGNOSIS 2


PROCUDURE 2

Step 1

Pull capillary from the
hole to replace the
thermostat.


Tip: 1

When inserting capillary
into the hole, make sure
the first red mark goes in
the hole, but second one
remains outside of the
hole.

Tip: 2

Make sure the pins of
thermostat cover are
properly inserted into the
holes.

Tip: 3

Make sure wires are
placed into cavity of
thermostat.

DIAGNOSIS 1


GO BACK TO COMPONENT LIST