PROCEDURE 1


Step 1

Unscrew bottom
attachment.

Step 2

Unscrew top
attachment.

Step 3

Remove the plastic
cover.

Step 4

Unscrew the plastic
guider.

Step 5

Hold cabinet and pull
appliance out.


Note:
Reverse procedures
above to install the
appliance.

CHECK AND TEST 1

Step 1

Check to see if drain channel is full of water.

Step 2

Insert a stiff cord or belt
into pipe.

Step 3

If the belt can pass through the pipe, it is blocked with soft food material.

PROCEDURE 2

Step 1

Twist the belt to loosen food material stuck on pipe wall, then use water to flush food material out of pipe.

CHECK AND TEST 2

Step 1

If belt could not pass through the drain pipe and water is still in channel, mark the belt at blockage point.

Step 2

Measure the length.

DIAGNOSIS 1

PROCEDURE 3

DIAGNOSIS 1

Method for testing rework: pour water into drain channel.

GO BACK TO COMPONENT LIST