CHECK AND TEST 1
Step 1
Open the fridge doors to check carefully if gasket is cracked.
Step 2
Check carefully to see whether gasket is deformed.
1) Example of slight deformation.
2) Example of gasket wrinkling.
DIAGNOSIS 1
PROCEDURE 1
Step 1
Blow hot air onto gasket with Hair Dryer to soften, so that gasket can be easily attached onto cabinet.
DIAGNOSIS 2
PROCEDURE 2
Pull gasket out from 4 corners.
Step 2
Install a new gasket.
Pay attention the
important tips for
installing gasket.
Tip 1
Start from corner.
Tip 2
Make sure gasket foot ispressed into gasket seat
completely.
Tip 3
Make sure gasket is well-aligned with gasket seat.
Tip 4
After closing door,make sure gasket is
well-attached to door.
Step 3
After replacing the doorgasket, blow hot air onto
gasket with Hair Dryer
to soften, so that gasket
can be easily attached
onto cabinet.
DIAGNOSIS 3
Step 1
Place a torch in cabinetand check to see if light
leaks out from gasket.
CHECK AND TEST 3
Step 1
Measure the width ofgasket seat opening with
Vernier calipers.
Step 2
Assessment of measuredresults.
DIAGNOSIS 4
CHECK AND TEST 4
Step 1
Use tool with sameshape as gasket seat
and insert into the
seat. Then turn the tool
around.
DIAGNOSIS 5
PROCEDURE 3
Step 1
attachment.
Step 2
Unscrew top
attachment.
Step 3
Remove the plasticcover.
Step 5
Unscrew the plasticguider.
Step 5
Hold cabinet and pullappliance out.
PROCEDURE 4
Step 1
Unscrew the fixationplate and remove it.
Step 2
Unscrew top hinge andremove it.
Step 3
Remove fridge door.
Reverse procedures
above to replace fridge
door.
Pay attention to cabinet
positioning.
Note
CHECK AND TEST 5
Step 1
Make sure gasket isn’tdetaching anywhere.
Insert the gasket into
gasket seat and pull it
with a force of 30N.
DIAGNOSIS 6
PROCEDURE 5
Step 1
After replacing thegasket, blow hot air onto
gasket with Hair Dryer
to soften, so that gasket
can be easily attached
onto cabinet.
DIAGNOSIS 7
Step 1
Place a torch in cabinet
and check to see if light
leaks out from gasket.
GO BACK TO COMPONENT LIST