PROCEDURE 1

Step 1

Unscrew bottom
attachment.

Step 2

Unscrew top
attachment.

Step 3

Remove the plastic
cover.

Step 4

Unscrew the plastic
guider.

Step 5

Hold cabinet and move
it out 3mm.


Note:
Reverse procedures
above to install the
appliance.

PROCEDURE 2


Step 1
Unscrew the locking
plastic.

Step 2

Remove the blue plastic.

Step 3

Lever off the terminal
box.

Step 4

Pull out integrated
protector and starter.

Step 5

Disconnect terminals.

CHECK AND TEST 1


Step 1

Put the pin into the
hole connected with
compressor to do the
test.

DIAGNOSIS 1

GO BACK TO COMPONENT LIST