CHECK AND TEST 1

Step 1

Open the fridge doors to check carefully if gasket is cracked.

Step 2

Check carefully to see whether gasket is deformed.


1) Example of slight deformation.

2) Example of serious
deformation.

DIAGNOSIS 1

PROCEDURE 1

Step 1

Blow hot air onto gasket
with Hair Dryer to soften,
so that gasket can be
easily attached onto
cabinet.

DIAGNOSIS 2


PROCEDURE 2


DIAGNOSIS 3

Step 1

Pull gasket out from 4
corners.

Step 2
Install a new gasket.
Pay attention the
important tips for
installing gasket.


Tip 1

Start from corner.

Tip 2

Make sure gasket foot is
pressed into gasket seat
completely.

Tip 3

Make sure gasket is
well-aligned with gasket
seat.

Tip 4

After closing door,
make sure gasket is
well-attached to door.

Step 3

After replacing the door
gasket, blow hot air onto
gasket with Hair Dryer
to soften, so that gasket
can be easily attached
onto cabinet.

DIAGNOSIS 3

Step 1

Place a torch in cabinet
and check to see if light
leaks out from gasket.

CHECK AND TEST 3


Step 1

Measure the width of
gasket seat opening with
Vernier calipers.

Step 2

Assessment of measured
results.

DIAGNOSIS 4


CHECK AND TEST 4

Step 1

Check internal shape of gasket seat. Use tool with same shape as gasket seat and insert into the seat. Then turn the tool around.

DIAGNOSIS 4

PROCEDURE 3


Step 1

Unscrew bottom
attachment.

Step 2

Unscrew top
attachment.

Step 3

Remove the plastic
guider cover.

Step 4

Unscrew the plastic
guider.

Step 5

Hold cabinet and pull
appliance out.

PROCEDURE 4


Step 1

Unscrew top hinge and
remove it.

Step 2

unscrew top hinge and
remove it.

Step 9

Remove fridge door.

Reverse procedures
above to replace fridge
door.
Pay attention to cabinet
positioning.

Note


CHECK AND TEST 5

Step 1

Make sure gasket isn’t
detaching anywhere.

Step 2

Insert the gasket into
gasket seat and pull it
with a force of 30N.

DIAGNOSIS 6

PROCEDURE 4


Step 1

After replacing the
gasket, blow hot air onto
gasket with Hair Dryer
to soften, so that gasket
can be easily attached
onto cabinet.

Please pay attention to
important points below.

DIAGNOSIS 7

Step 1

Place a torch in cabinet
and check to see if light
leaks out from gasket.