PROCEDURE 1

Note
Before testing LED light,
please follow procedure 1
to disassemble LED first.

Step 1

Lever off screw cover.

Step 2
Unscrew.

Step 3

Remove thermostat box.

Step 4

Disconnect terminal for
LED.

Step 5

Lever off LED plate.

CHECK AND TEST 1

Step 1

Connect new LED onto
terminal and plug in to
switch on the appliance.

DIAGNOSIS 1

PROCEDURE 2


Tip 1:

When inserting capillary into
the hole, make sure the first
red mark goes in the hole,
but second one remains
outside of the hole.

Tip 2:

Make sure the pins of
thermostat cover are
inserted into the holes.

Tip 3:

Make sure wires are
placed into cavity of
thermostat.