PROCEDURE 1

Step 1

Unscrew bottom
attachment.

Step 2

Unscrew top
attachment.

Step 3

Unscrew the plastic
guider.

Step 4

Hold cabinet and move
it out 3mm.

CHECK AND TEST 1

Step 1
Unscrew the locking
plastic.

Step 2

Remove the blue plastic.

Step 3

Lever off the terminal
box.

Step 4

Pull out integrated
protector and starter.

Step 5

Disconnect terminals.

Step 6

Put the pin into the
hole connected with
compressor to test.

DIAGNOSIS 1

GO BACK TO COMPONENT LIST