PROCEDURE 1

Step 1

Use 2mm slotted
screw driver to lever off
decorative cover.

Step 2

Unscrew LED cover
with a Cross-head
screwdriver.


Step 3

Unscrew cover of
mainboard with a
Cross-head screwdriver.

Step 4

Remove mainboard
cover.

Step 5

Disconnect terminals on
mainboard.

CHECK AND TEST 1


Step 1

Power the appliance, use
multimeter to measure
output for compressor.

DIAGNOSIS 1

PROCEDURE 2


Step 1
Disassemble terminals
of mainboard.

Step 2

Unscrew.

Step 3

Loosen buckle and take
out mainboard.
CHECK AND TEST 2


Step 1

Power the appliance, use
multimeter to measure
output for compressor.

DIAGNOSIS 2

GO BACK TO COMPONENT LIST